Home
Gases Detected

Products on our website for category:

Gas Detection


For Product PDF click the heading.

49
Canary Silo-Chek

SILO•CHEK Phosphine Monitor is designed and built in Australia to detect the phosphine (PH) levels in stored grain and horticultural products during fumigation. SILO•CHEK monitoring range is 0 to 2000ppm and now an automatic pump version has been added to the range.

SILO•CHEK is easy to operate with high accuracy and selectivity to phosphine. The sensing element is not interfered with by co-existing substances which have previously caused reading errors in other fumigation monitors.

SILO•CHEK is robustly built into a small ABS enclosure with a large easy to read LCD display. It’s response is linear to phosphine gas.


 

GFG G460

GfG’s new intrinsically safe G460 is a rugged, compact instrument for simultaneous detection of up to 6 gases. G460 detectors are available for use with a wide range of longlasting, interchangeable smart-sensors for LEL, O2, H2S, CO, NH3, SO2, CI2, PH3, NO2, HCN, ETO, ClO2, HF, O3, NO and H2. Infrared (NDIR) sensors for the direct measurement of CO2, and photoionization detectors (PID) for the measurement of volatile organic chemical (VOC) hazards are also available. The G460 offers completely automatic calibration, one-button operation, top mounted display and interchangeable battery packs.


 

Geotech G100

Incubator CO2 Analyser - Geotech G100

For the verification of CO2 in incubators used in IVF & research applications. An analyser specifically designed to monitor incubator CO2 levels for IVF, medical & pharmaceutical research.

The Geotech G100 is fast, simple to use and accurate. Options include an oxygen 0-100%, dual temperature probes, humidity sensor,data storage and download.


 

Geotech G110

CO2 analyser designed to monitor CO2 for multiple applications including Brewing industry, medical and food processing.


 

Canary Silo-Safe

SILO•SAFE personal Phosphine Monitor is designed and built in Australia to detect very low levels of phosphine (PH3) that may pose a toxic risk around grain storage facilities. The SILO•SAFE personal Phosphine Monitor has a measuring range of 0.00 to 20.00ppm making it ideal for monitoring toxic levels.

SILO•SAFE is easy to operate with high accuracy and selectivity to phosphine. The sensing element is not interfered with by co-existing substances which have previously caused reading errors in other fumigation monitors.

SILO•SAFE is robustly built into a small ABS enclosure with a large easy to read LCD display. It’s response is linear to phosphine gas.


 

Canary SmarTox-I

Smartox-I series

The ‘SmarTox-I’ gas detection head is a reliable and robust device that allows the safe and continuous monitoring of potentially hazardous areas for many toxic gases.

Including the monitoring of ppm levels of ethylene gas used in fruit ripening processes.

The ‘SmarTox-I’ head employs a highly respected and reliable electrochemical sensor to measure concentrations of specific gases.


 

Canary SmarTox-OP

The ‘SmarTox-OP’ has been developed for portable continuous operation in aggressive outdoor environments. Such as would be experienced at sea where stored grain is held under controlled fumigation throughout a voyage.

The ‘SmarTox-OP’ functions as a parts per million (PPM) monitor for phosphine (PH) measuring in the range 0- 2000PPM. It utilizes proven electrochemical sensor technology for accurate concentration measurement together with sample pre-conditioning to ensure repeatability of readings and extended sensor life.


 

GFG GMA313

GFG GMA 313
The GMA313 uses an infrared (NDIR) Carbon Dioxide Sensor and indicates a gas hazard immediately. With its built-in alarm light and its loud buzzer the GMA313 gives a reliable warning not only at the danger spot but even before entering the hazardous area. The audible/visual alarm unit gives an additional alarm indication wherever you want to install it, e.g. at the cellar/kegroom door, stairways, or at the bar.
The GMA313 complies to the Australian Standard, AS5034.


 

Geotech G150

CO2 analyser designed to monitor CO2 for all indoor air quality applications.


 

Geotech G200

The G200 N2O analyser is designed to safety check background and breathing zone levels of N2O (0-1000ppm) in medical applications.


 

Geotech G210

The G210 is specifically designed for highly accurate measurement and verification of the quality of piped hospital gases N2O and O2 and leak detection in hospitals.

Measuring range is 0 to 100% for both N2O (laughing gas) and Oxygen and can be used to check the purity of piped gases as well as in the commissioning of pipeline gas reticulation systems and also leak detection.


 

Canary SmarTox-OP

Canary SmarTox-OP

Methyl Bromide fumigation monitor via an infrared detector range 0-100 grams/m3 CH3Br.


 

Canary Controller

The CANARY ‘Smart’ Gas monitoring system controller models 1000, 3000 & 8000 can be used for occupational or environmental monitoring.

Part Per Million levels of toxic gases, general hydrocarbon vapours and physical parameters such as wind speed and temperature can be measured, external devices activated or retransmitted to a building management system or PLC.


 

Aeroqual series 100
Aeroqual series 300 and 500
Aeroqual series 900
GFG G450

Affordable, confined space compliance 4 gas monitor certified for zone 0 with 3 year factory warranty.


 

GFG MicroIII Pump
GFG G300
GFG GMA40B series
GFG GMA81/84
GFG GMA88
GFG CC28D

GfG’s model CC 28 D
Low profile industrial commercial Ex rated %LEL CH4 / Hydrocarbon transmitter.


 

GFG GMA36Pro
GFG CS21 refrigerant leak detection & toxic gas

GfG CS21 for Refrigerant Leak Detection
High sensitivity covering a broad range of refrigerants R134a, R22, R404a plus others and toxic gases...


 

GFG ZD21
GFG CI21
INUSA Accou-zone
INUSA AET 030
INUSA H1 series
INUSA In2000
INUSA L2-LC
INUSA L2-LC-W1
INUSA MiniHicon_NEMA
INUSA MnHiCn_DS1001
GFG MicroIV

GfG Micro IV - single gas detector with data logger and infrared interface.


 

GFG GMA100
Scott Meridian

Scott Safety's Meridian Universal Gas Detector represents the next generation fixed gas detection.

One Detector, One Head, Multiple Sensors - No need to specify multiple detectors. Meridian's head is designed to accept Scott's standard and Rock Solid electrochemical sensors, Catalytic Bead, IR and Metal Oxide Semiconductor sensors – that can be installed without powering down the gas detector. Up to 3 sensors can be added. Meridian smart electronics automatically calibrate for the type of gas detected. And the ability to integrate with new Scott sensor technologies is a future-proof solution.

Flexible Communication - Meridian will support a number of industry standard communication protocols.

Universal Accessories - From calibration adapters to flow cells to deluge guards, one set of accessories serves all applications whether toxic or combustible gas detection.


 

GfG G460

GfG G460

Workplace atmosphere detection of Methly Bromide, using a PID sensor range 0-100ppm CH3Br.


 

GfG G460

GfG’s new intrinsically safe G460 is a rugged, compact instrument for simultaneous detection of up to 6 gases. G460 detectors can be configured with a wide range of long lasting, interchangeable smart-sensors including 0-5% Ethyl Formate (EtF) and be fitted with a sampling pump.

The G460 offers completely automatic calibration, one-button operation, top mounted display and interchangeable battery packs.


 

RC St-48

RC Systems ST-48 Non-Intrusive Single/Dual Sensor Transmitter, is designed for gas detetcion applications. This versatile unit has a range of inputs and different modes for low power sensors and higher power sensors. It's dual monitor mode dramatically reduces installation costs. Wireless model is also available.


 

RC St-49

RC Systems ST-49 Toxic / Oxygen sensor transmitter. This is a 2 wire 4-20mA sensor transmitter. It accepts low power toxic or oxygen electrochemical sensor modules and transmits gas values to an appropriate receiver device. Target gas type and range are determined by the field replaceable sensor modules. Calibration of monitored gas values must be performed at the receiver device. Single, dual, four, 16 and 64 channel receivers suitable for calibration, display, alarm, and transmission of monitored values are available.


 

RC Rig Protector Mobile Monitoring

RC Systems Rig Protector Multipoint Critical Gas Detection and Monitoring package is a wireless detection and monitoring system that warns of hazardous gas levels. The system monitors up to four points and can transmit data for up to 3 miles. It is suitable for hydrogen sulphide, carbon monoxide, sulphur dioxide, ammonia,and certain combustibles. Flexible mounting and power supply options make it suitable for monitoring perimeters, mobile work sites including HAZMAT facilities, rigs, disaster responses. Options include a solar panel.


 

RC ST46

RC Systems Model ST -46 Non-Intrusive Sensor Transmitter allows complete calibration to be performed on sensors and analysers without opening their enclosures. The only tool required is a small magnetic wand designed to be carried on a key chain. The ST-46I accepts 4-20mA inputs, the ST-46LEL accepts catalytic bead combustible detectors and the ST-46EC accepts electrochemical sensors.


 

RC ST71 HMI software

RC Systems ST 71-HMI PC Software - Human machine interface provides operator interface functions including centralised monitoring, visualisation and data archive for RC Systems ST-71 sixteen channel controllers. ST-71 HMI can monitor from one to ten controllers providing real-time status display and historical trend data for 16 to 160 points.


 

RC ST-90 Dual

RC Systems ST-90 Dual channel controller provides simultaneous display and alarm functions for two monitored variables. The ST-90 Dual can function as a critical alarm controller for toxic or combustible gases, vibration, tank levels and other process values.


 

Status FGD3 series

Intrinsically Safe Fixed Gas Detectors FGD3 Series For detection of Flammable (Hydrocarbon) gases, Toxic Gases and Oxygen

The FGD3 series gas detectors are powered from an intrinsically safe dc power supply and provide an industry standard 4 to 20mA output signal.

They are fitted with a single gas Infrared, Catalytic or Electrochemical sensor for the detection of either Flammable (Hydrocarbon) gases, Toxic Gases or Oxygen according to the type of sensor fitted.

- Ammonia, Carbon Dioxide, Carbon Monoxide, Chlorine, Flammable (Catalytic), Flammable (Infrared), Hydrogen, Hydrogen Chloride, Hydrogen Sulphide, Methane, Nitric Oxide, Nitrogen Dioxide, Oxygen, Sulphur Dioxide.

Featuress include: Industry standard 4 to 20mA output. Digital display. Single operator calibration.


 

Status FGD10 series

Status Scientific Controls - Flameproof Gas Detectors FGD10 Series infrared and non-infrared
IECEx and SIRA cerified for use in potentially explosive atmospheres.
Flameproof Fixed Gas Detectors are used in Potentially Explosive Atmospheres where, due to the nature of the environment or the industrial process taking place, there is the risk of an incendive spark from electrical apparatus causing an explosion to occur.
Typical Examples are the oil, gas and chemicals industries.
The FGD 10 series comprises detectors with or without a window and digital display. They can be supplied either in aluminium (standard type) or grade 316 stainless steel (suffix '-SS' ).


 

Status FGD4 Series

Safe Area Gas Detectors - Loop Powered FGD4 Series of 4 To 20mA Transmitters

The FGD4 series of gas detectors are powered from an 8 to 24 volts dc power supply using the industry standard 4 to 20mA two-wire current loop to transmit the gas level to a separate control panel such as the Status Scientific Controls LC Series. The Carbon Dioxide version uses Infrared gas detection technology and requires a third connection to power the infrared sensor.

Note - These gas detectors are not certified for use in potentially explosive atmospheres and therefore must only be used in applications where it is known that potentially explosive gases do not exist.

Typical examples of their use are in water purification processes, food preparation and/or storage, car parks, swimming pools, medical applications.

They are available for detection of the following common gas types: Ammonia, Carbon Dioxide, Carbon Monoxide, Chlorine, Ethylene Oxide, Hydrogen Chloride, Hydrogen Sulphide, Nitric Oxide, Nitrogen Dioxide, Oxygen, Sulphur Dioxide.


 


Products  


Back

The Canary Company - Smart Montoring Systems


 Web Enquiry
 
 
 
 
 
 

Products By Application
Confined Space
Hazardous Gases
Clean Water-Ozone/Cl2
H2S Odour Control
Fumigation Stored Grain
Carbon Detectors
Food Ripening
Toxic Gas Detection
Combustible Gas Detectors
Indoor Air Quality
Hydrocarbon Leak Detector
Refrigerant Leak Detector
Cellar Gas Detection
Calibration Gas Sources
Control Systems
Respiratory Air Monitors
Gas Sample Bags/Tubing
Inert Labware & Fittings
Car Park Air Quality
Laboratory's Air/Ventilation
 

Home Page Contact Us Site Map